Selected:

Hand hone CB-SSM

71 kr (89 kr inkl. moms)

Article number: CB-SSM Categories: ,

Hand hone CB-SSM

Combination grit:
Fine on one side (for burrs).
Coarse on the other (for nicks).

Ceramic bonded abrasive grains of aluminum oxide.
Dimensions: 75x18x10 mm.

Before sharpening

The hand hones can be used to remove nicks before sharpening (if the skate blade is damaged). Two hand hones can be rubbed against each other to keep them flat and clean. Even better is to rub a hand hone against an old grinding wheel.

After sharpening

When a skate blade is sharpened to obtain sharp edges underneath, fine burrs will arise on the sides of the blade. Those burrs make the skate feel dull against the ice and increase friction. Use a hone (whetstone) to remove the burrs by pulling it evenly along the sides. Then you will have obtained perfect sharpness!

Close Menu
×

Cart

Enquiry about

Hand hone CB-SSM